Tags

io_uring-5.10-2020-11-13

io_uring-5.10-2020-11-13

efi-urgent-for-v5.10-rc3

Couple of EFI fixes for v5.10:
- fix memory leak in efivarfs driver
- fix HYP mode issue in 32-bit ARM version of the EFI stub when built in
  Thumb2 mode
- avoid leaking EFI pgd pages on allocation failure

vfs-5.10-fixes-2

More VFS fixes for 5.10-rc4:
- Minor cleanups of the sb_start_* fs freeze helpers.

vfs-5.10-fixes-1

VFS fixes for 5.10-rc4:
- Finally remove the "convert to trylock" weirdness in the fs freezer
  code.  It was necessary 10 years ago to deal with nested transactions
  in XFS, but we've long since removed that; and now this is causing
  subtle race conditions when lockdep goes offline and sb_start_* aren't
  prepared to retry a trylock failure.

xfs-5.10-fixes-5

Fixes for 5.10-rc4:
- Fix a fairly serious problem where the reverse mapping btree key
comparison functions were silently ignoring parts of the keyspace when
doing comparisons.
- Fix a thinko in the online refcount scrubber.
- Fix a missing unlock in the pnfs code.

xfs-5.10-fixes-4

Fixes for 5.10-rc4:
- Fix a fairly serious problem where the reverse mapping btree key
comparison functions were silently ignoring parts of the keyspace when
doing comparisons.
- Fix a thinko in the online refcount scrubber.

v5.9.8

This is the 5.9.8 stable release

v5.4.77

This is the 5.4.77 stable release

v4.19.157

This is the 4.19.157 stable release

v4.14.206

This is the 4.14.206 stable release

v4.9.243

This is the 4.9.243 stable release

v4.4.243

This is the 4.4.243 stable release

orange-pi-5.9-20201110-1601

Release: orange-pi-5.9-20201110-1601

NEWS
====

See also:

- https://xnux.eu/log/
- https://xnux.eu/devices/pine64-pinephone.html
- https://xff.cz/kernels/

2020-11-10:
- pulled in v5.9.7
2020-11-01:
- pulled in v5.9.3
- added some musb suspend/resume fixes
- fixed regulator probe on a711
2020-10-30:
- added ov5640 autofocus support from Martijn Braam (you'll need /lib/firmware/ov5640_af.bin)
- added fix for DSI panel 36.6 FPS issue (myself)
- pulled in v5.9.2
2020-10-19:
- fix orange pi 3 ethernet
2020-10-12:
- fix issue with dsi clock described here: https://xnux.eu/log/#021
- rebase on v5.9 final
- integrate pinetab panel patches from (untested)
  https://gitlab.com/pine64-org/linux/-/commits/pine64-kernel-5.7.y-pinetabpanel/
2020-09-29:
- add a few more codec API fixes from Samuel
2020-09-28:
- rebase on top of 5.9-rc7
- integrated the newest audio patches from Samuel
2020-09-23:
- port battery thermal regulation fix from p-boot (completely untested, see https://xnux.eu/log/#018)
2020-09-18:
- cedrus panic fix
- rebase on linus/master
2020-09-17:
- further modem driver improvements (fix urc setting on old modem firmwares)
2020-09-13:
- rebase on top of 5.9-rc5
2020-09-12:
- rebase on top of 5.9-rc4+
2020-09-10:
- rebase on top of 5.9-rc4+
- further fixes for the modem driver poweron, support for fast poweroff feature
  present on new modem firmware
- added flash DT changes
- add mounting matrix and a kernel command line option to override it (ignore_mount_matrix)
- https://xff.cz/kernels also contains special kernel builds for my multi-dist image
  (see https://xnux.eu/log/)
- enabled opportunistic sleep
- enabled btrfs support
2020-09-01:
- rebase on top of 5.9-rc3
2020-08-19:
- rebase and port to 5.9-rc1
- fix various issues with 5.9-rc1
- fix sleeps in atomic context in anx7688 driver
- dropped panfrost dvfs patches for now (conflicts, stability issues)
- fix modem UART issues on powerup (sometimes not receiving RDY, etc.)
  - root cause was host UART locking up due to noise on RX, and the
    fix is to only open UART port when the modem is powered
2020-08-11:
- fix sun50i-codec-analog probe failure when built-in
2020-08-09:
- pull in codec changes from Samuel
- don't wait for RDY but poll with empty AT command for the modem's status
2020-08-06:
- added Samuel's patch for making recording from the codec work again
2020-08-05:
- modem driver fixes for BH
2020-08-03:
- fixed AC100 driver to make it work without mod clock
2020-08-02:
- integrated latest Samuel's audio patches + rebased my AC100 support on top
- finished the modem-power driver into a hopefully useable state
2020-07-25:
- rebased on top of 5.8-rc7+
- fixed modem driver issue with not shutting down the modem on poweroff/reset
  on PinePhone (introduced during modem driver rewrite around 5.8-rc5)
- worked around AXP reseting input current limit to 500mA regardless of
  BC detection being disabled (happened on boot with USB-C cable connected
  to USB-C PD charger) (and reverted again)
- improved modem driver
  - initialize the modem configuration for proper sleep
  - setup QDAI automatically from DTS
  - show modem firmware version in dmesg
  - added rfkill interface
  - handle URC caching during suspend
2020-07-16:
- added HP jack detection patches from A-wai
2020-07-14:
- added support for Pinebook Pro
- fix issue in my bl_pwm PinePhone patch that broke Pinebook Pro's backlight
2020-07-13:
- rebased on top of 5.8-rc5
- improved HW led trigger API
- more modem-power work (change to serdev, recv messages from the modem)
- support HDMI audio on PinePhone
- bump PD power requirement to 15W on PinePhone
2020-07-08:
- refactoring of the modem driver, moved to modem-5.8 branch (not finished
  yet, see TODO in the driver)
- update pinephone 1.0-1.2 dts to reflect the differences in modem setup
- enable orange pi 3 hdmi audio
2020-07-06:
- rebased on top of 5.8-rc4
2020-07-05:
- Added fixes for PinePhone panel initialization after resume from sleep
2020-07-04:
- Integrated Clément's HDMI audio series (20200704113902.336911-1-peron.clem@gmail.com)
- Integrated Clément's panfrost DVFS series (20200704102535.189647-1-peron.clem@gmail.com)

My kernel's main integration branch is 'orange-pi-$VER' (this one).
No other branch is supposed to work alone. My defconfigs are tested
and work on the boards I support. Read the README.md for more info.

Only my branches based on the current mainline kernel branch are
maintained (those are usually the -rc# kernels!). You can find the
current mainline version here https://www.kernel.org/ (mainline: ...)

My prebuilt kernels can be found at https://xff.cz/kernels/ You can
use them to test that your board works, or just run them without
bothering with building everything yourself. I run them on all my
boards.

My website is https://xnux.eu and may contain useful advice.

Good luck!

     ~megi

4.9.236-104

4.9.236-51

v5.9.7

This is the 5.9.7 stable release

v5.4.76

This is the 5.4.76 stable release

v4.19.156

This is the 4.19.156 stable release

v4.14.205

This is the 4.14.205 stable release

v4.9.242

This is the 4.9.242 stable release